Components like rubber hoses, gaskets and water pumps can spring a leak with regular wear and tear, says Richard Reina, product training director of CARiD.com, an online auto parts seller. He adds that certain driving conditions, like stop-and-go traffic on a hot day, can put significant stress on the cooling system, causing it to fail.
Fortunately, you can usually avoid this problem with regular maintenance by a certified mechanic, who will check your car’s coolant and oil levels and inspect hoses, fans, the thermostat and other parts in the cooling system, Reina says.
But what do you do if your temperature gauge starts to climb toward “H” or the dashboard warning light flashes? “The steps you take could mean the difference between replacing a $20 thermostat and thousands of dollars in repairs,” says Reina.
Here’s what to keep in the trunk in case of overheating:
- Small, basic tool kit
- Several quarts of oil
- 1 gallon of coolant (50/50 mix of antifreeze fluid and water)
- Heavy-duty gloves
Here are the five steps Reina recommends you take when your car gets hot under the hood.
1. Turn On The Heater
It sounds counterintuitive, but Reina recommends turning on the heater. It draws warmth away from the engine and into the passenger compartment, lessening the burden on the engine’s cooling system. In certain circumstances, that may be enough to reverse the overheating, he says. You’ll know it’s working if the warning light goes off or the temperature gauge returns to the neutral position.
2. Pull Over
If your car continues to overheat after you’ve been driving for a few minutes with the heater on, pull over and cut the engine off—it’s the safest and surest way to cool the engine, says Reina. If you have roadside assistance, now is a good time to call, as you may need a tow, Reina suggests.
3. Be Patient
If you don’t have roadside assistance, be patient; it will take at least 15 minutes for the engine to cool. In the meantime, do not attempt to open the hood; the coolant in a car that has overheated may be in excess of 230 degrees, says Reina. Once the hood is open, there’s a risk of being sprayed with hot water or steam. “Your personal safety is most important,” he says. “Waiting for at least 15 minutes allows the hood, engine and leaking coolant to cool.”
4. Add Coolant
When you’ve waited at least 15 minutes and the hood is cool to the touch, put on gloves, open the hood, and locate the radiator cap (consult the owner’s manual if necessary), says Reina. Cover the cap with a towel and slowly push down and loosen it a quarter of a turn, to release pressure that has built up as a result of the coolant expanding when heated. Then fully open the radiator cap and slowly add coolant—half water, half antifreeze—until the liquid reaches the “full” line. You should also add coolant to the small, clear plastic overflow reservoir mounted to the side of the radiator, he says. Next, replace the cap and turn on the engine. “If the temperature gauge comes back to normal or the red warning light goes out, you can proceed with caution while keeping an eye on the temperature gauge or light,” says Reina.
5. Drive To A Service Station
Adding coolant does nothing to address the problem that caused your engine to overheat in the first place, but it often allows you to drive safely to the nearest repair station. “A professional will need to inspect your car’s cooling system,” says Reina. While driving, keep an eye on the temperature gauge. And take notice of everything, like fluid under the car or steam under the hood. “This basic information will greatly help in the diagnosis,” Reina explains.
Download and print this PDF checklist of what to do—and what items to have on hand—in case of overheating.
Need help on the road? Easily request roadside assistance with the GEICO Mobile app.
Read More: With any car problem, awareness is key. Here are seven car noises you should listen for.
By Patrick Rogers